When you're setting up a home theater or a commercial sound system and you want to pass multiple cables through a wall, this pass-through bundle cable wall plate is ideal. This cable pass-through wall plate is designed for HDMI, VGA, fiber optic, component and RCA audio cables that are routed through the wall and are already terminated. A pass-through wall plate is also helpful when you have many cables in one place that makes wall plate termination impractical. The diameter of the hole is approximately 2 inches and the cables are angled at 90 degrees. With this design, you can place equipment close to the wall. The rigid ABS plastic plates are standard dual-gang size. Matching screws are included.
Cut-out size: 2.93" W x 3.87" H
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
High impact plastic
Bulk cable opening in center
Screws included
Fits dual gang box
3 Questions asked
Have a Questions?
What's on your mind?
Anne • 12/17/2019, 2:17:43 PM
How many wall plates does this come with 1 or 2?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Anne:
This is a single double gang plate.
TL/4351
Joe • 12/17/2019, 2:17:43 PM
What is the maximum thickness of material that will fit through the narrowest part of the opening?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Joe: The widest point is an inch with rounded corners; we have squared version which appears to be more extensive. I am not sure what you are asking, these are double gang plates that can be extended out into the room or reversed so indented into the wall. TL/5557
Mike • 05/26/2026, 4:04:12 PM
What are the specifications of the screws (width/length)?
Customer Service • 05/28/2026, 2:24:11 PM
For Decora-style wall plates like the OSD Audio speaker plates, the screws are standard electrical wall plate screws:
Thread size: #6-32 machine screw
Diameter: about 0.138" (3.5 mm major diameter)
Thread pitch: 32 TPI (threads per inch)
Typical lengths are:
Application Typical Screw Size
Decora insert to wall plate/frame #6-32 × 5/16"
Wall plate/frame to electrical box or LV bracket #6-32 × 1/2"
The short decorative screws used on Decora inserts are commonly:
#6-32 × 5/16" oval head
The longer mounting screws for attaching the assembly to the j-box or low-voltage ring are usually:
#6-32 × 1/2" oval head
If you need a longer screw for Deep/Recessed boxes: #6-32 × 3/4" to 1-1/2"
TimL/OSD Tech Support
