SKU: AP850-PAR
OSD AP8508" 2-Way High Definition Outdoor Patio Speaker Pair 200W, IP54 Rated, Black or White
Use Code 'SAVEOSD'
OSD Audio's AP850, a powerful 8" 2-way indoor/outdoor patio speaker built to withstand harsh weather conditions. Rated at IP54, these speakers are designed to withstand dust, rain and humidity. With a frequency response of 32Hz - 20kHz and a peak power handling of 20-200W, these speakers deliver clear, distortion-free sound even at high volumes. With a sensitivity of 88 dB and an impedance of 8 Ohms, these speakers are compatible with a variety of audio systems. The gold-plated spring-loaded binding posts provide a secure and stable connection for your audio cables. The rust-resistant aluminum grille not only adds to the speaker's durability but also offers a sleek and stylish look. The AP850 speakers come in a pair and are available in black or white. They come with full motion bracket, which allows for 180-degree swivel and 60-degree tilt, making it easy to mount them horizontally or vertically. With a 1 year warranty, you can enjoy your music with peace of mind. Recommended for covered areas such as patios, decks and overhangs covering areas up to 800 square feet.
Features:
- Rugged outdoor patio speaker pair for commercial and residential applications
- All-weather enclosure resists harsh weather conditions
- Engineered to produce the highest quality sound in open spaces
- Unique multi-tilt mounting brackets that allow for 180-degree swivel and 60-degree tilt
- Mounting bracket is designed to mount either vertically or horizontally
- Includes a powerful 8” polypropylene woofer that cranks out full and enveloping bass
- Crispy clear high notes with 1” silk dome tweeter
- Rigid, acoustically inert enclosure, silicone-sealed internal cabinetry and driver
- Rust-resistant aluminum grille
- Includes mounting hardware
- Available in black or white
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 8" 2 Way Indoor/ Outdoor Patio Speakers
- IP54 Rated
- Woofer: 8" Polypropylene Cone
- Tweeter: 1" Silk Dome
- Frequency Response: 32Hz - 20kHz
- Power handling: 20-200W Peak
- Sensitivity: 88 dB
- Impedance: 8 Ohms
- Gold-Plated Spring-Loaded Binding Posts
- Rust-resistant aluminum Grille
- Full Motion Bracket
- Unit Dimensions: (L x H x D) 14.9" x 9.6" x 9.4"
- Sold As: Pair
- Colors Available: Black or White
- Weight: 11 lbs Each Speaker
- Warranty: 1 Year
View Owner's Manual
42 Questions asked
Have a Questions?
What's on your mind?
Connor Long • 12/17/2019, 2:17:43 PM
What are the main differences between the AP840 & AP850 other than the Optional 70 volt Tap & the 2" & 1" Tweeters, also can you tell a major difference in sound quality/Total Output between the 2" & 1" Tweeters . I'm looking to replace a pair of old QSC AD-S82, on a baseball field however won't be using the 70 volt Option.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Conner:
Both he AP-850 and AP-840 will work for your application. Specs as you can see our similar including both have 1 inch supernal Tweeters (that is a soft dome weatherproof tweeter. I do think the Cabinet of the AP-850 is a better design especially the front baffle indented around the tweeter for a better dispersion pattern for reproducing vocals (like making announcements). They also maybe a better match to the Speakers you are replacing. The AP-850 is also available with out the 70-Volt taps for $10.00 less.
We have both speakers in stock available in black or white finish
Good Luck
TL/3709
Mark • 12/17/2019, 2:17:43 PM
Does the AP850 use a different woofer than the AP840? Does either the AP840 or AP850 have a crossover? I own a pair of the AP840's and I am not very happy with sound reproduction. I am considering the AP850's but, would like to know if they are up to par. I have several pairs of NXG NX-AW6 and they have way better sound reproduction than the AP840's.
Thanks
Customer Service • 12/17/2019, 2:17:43 PM
Hi Mark:
The AP-850 has better components (Woofer, Tweeter and crossover). And a more solid Cabinet. When did you purchase the AP-840 speakers? Do you have an order number?
Apparently I am now being told a number of customers have swapped the AP-840 with the AP-850 and are much happier with the results.
TL/3734
Jeff • 12/17/2019, 2:17:43 PM
I have a control$ 8 zone amp. 120 Wattts @ 8ohm per channel. Will this be sufficient to drive the AP850 speakers?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jeff:
These will work fine for your application. The key specification is the Sensitivity rating. The higher the number the more efficient the speaker and less power hungry they are. Anything above 88 dB is good indicator. The 200 watts are more for peak power with a RMS continuous power rating of 100 to 150 watts. So no problem using these in your setup.
Good Luck
TL/3751
David • 12/17/2019, 2:17:43 PM
What is the best amplifier to drive a single pair of these speakers? Also, what do you recommend to use for an in-wall volume control - Knob/Rotary control (not slide)?
Customer Service • 12/17/2019, 2:17:43 PM
Hi David:
The best amplifier to drive these would be our AMP200. And if you are looking for a single volume control where you are not concerned with Impedance matching then you would want to use the resistor based volume control which comes in an indoor VSK-120 or in an outdoor version OVC-305; note, both are rotary style. The resistor based volume controls have a broader frequency response with no high or low end roll-off. You could even add a second pair of AP-850 to speaker B of the AMP200 and run through another Resistor based volume control with no problems. The AMP-200 is a High current amplifier featuring, large Toroidal Power Supply, High Capacitance, all discrete components in the Triple Darling-ton Audio Section and Ample Internal Heat sinks. A true audiophile Power Amplifier. You will want to run a minimum 14 gauge CL3/FT4 rated speaker wire.
Good choices
TL/3791
Russ • 12/17/2019, 2:17:43 PM
I was thinking about powering these with a JL audio Bluetooth audio controller and JBL marine amplifier (12V system mounted in an outdoor kitchen). I know these are 8 ohm speakers. Do you see a problem with compatibility using these speakers with car stereo electronics?
Russ
Customer Service • 12/17/2019, 2:17:43 PM
Hi Russ:
Assuming you have a JBL MA-6002 four channel Marine Power Amplifier that you could bridge and double the output of the Amplifier you would have no problem getting the most out a pair of AP-850.
If you are using a JBL-MA-6002 two channel amplifier it will work but at 8 ohms will not draw as much current or will limit your output power. You might consider powering two pair of our AP-670 Patio speakers in parallel so that your amplifier is driving a 4 ohm load and pushing more current and more audio output. Note that 2 pair of AP-670 will cost a little more than a single pair of AP-850. Specs are very close with the AP-850 rated for higher power. Both are 44 to 45 Hz on the low end side and sensitivity for both runs 90 db so they are efficient.
Either would work
TL/3914