SKU: AP850-PAR
OSD AP8508" 2-Way High Definition Outdoor Patio Speaker Pair 200W, IP54 Rated, Black or White
Use Code 'SAVEOSD'
OSD Audio's AP850, a powerful 8" 2-way indoor/outdoor patio speaker built to withstand harsh weather conditions. Rated at IP54, these speakers are designed to withstand dust, rain and humidity. With a frequency response of 32Hz - 20kHz and a peak power handling of 20-200W, these speakers deliver clear, distortion-free sound even at high volumes. With a sensitivity of 88 dB and an impedance of 8 Ohms, these speakers are compatible with a variety of audio systems. The gold-plated spring-loaded binding posts provide a secure and stable connection for your audio cables. The rust-resistant aluminum grille not only adds to the speaker's durability but also offers a sleek and stylish look. The AP850 speakers come in a pair and are available in black or white. They come with full motion bracket, which allows for 180-degree swivel and 60-degree tilt, making it easy to mount them horizontally or vertically. With a 1 year warranty, you can enjoy your music with peace of mind. Recommended for covered areas such as patios, decks and overhangs covering areas up to 800 square feet.
Features:
- Rugged outdoor patio speaker pair for commercial and residential applications
- All-weather enclosure resists harsh weather conditions
- Engineered to produce the highest quality sound in open spaces
- Unique multi-tilt mounting brackets that allow for 180-degree swivel and 60-degree tilt
- Mounting bracket is designed to mount either vertically or horizontally
- Includes a powerful 8” polypropylene woofer that cranks out full and enveloping bass
- Crispy clear high notes with 1” silk dome tweeter
- Rigid, acoustically inert enclosure, silicone-sealed internal cabinetry and driver
- Rust-resistant aluminum grille
- Includes mounting hardware
- Available in black or white
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 8" 2 Way Indoor/ Outdoor Patio Speakers
- IP54 Rated
- Woofer: 8" Polypropylene Cone
- Tweeter: 1" Silk Dome
- Frequency Response: 32Hz - 20kHz
- Power handling: 20-200W Peak
- Sensitivity: 88 dB
- Impedance: 8 Ohms
- Gold-Plated Spring-Loaded Binding Posts
- Rust-resistant aluminum Grille
- Full Motion Bracket
- Unit Dimensions: (L x H x D) 14.9" x 9.6" x 9.4"
- Sold As: Pair
- Colors Available: Black or White
- Weight: 11 lbs Each Speaker
- Warranty: 1 Year
View Owner's Manual
42 Questions asked
Have a Questions?
What's on your mind?
Burn • 12/17/2019, 2:17:43 PM
I currently have the AMP200 powering a set of 8ohm speakers on both the A and B switches with 2 SVC100 in line of both the A and B speakers. If i were to replace one set of speakers with the AP850, would the AMP200 be able to power both sets and what should the impedance be set to on the SVC100's.
Customer Service • 12/17/2019, 2:17:43 PM
HI Burn:
You will have no problem subbing a pair of AP850 with whatever pair of 8 ohm speakers you currently have. The impedance setting should be 1/2X for both SVC100. Technically you can connect three pair of 8 ohm speakers in parallel with the AMP300, all on speaker A if you wanted or 2 on speaker A and a single speaker on B. I might have also selected the SVC300 with this Amp. It is not a bad thing to run this amp consistently at a 4 ohm load. I compare running this AMP200 at 8 ohm to owning a Corvette and driving it at 35 mph on the highway.
TL/4730
Billy • 12/17/2019, 2:17:43 PM
Can you add some more photos of different angles, like the AP840 has?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Billy:
Good suggestion, I be able to do something on that next week when I will be in our California warehouse. I try and have additional photos posted and also send some directly to you. What is you application?
tim@osdaudio.com
Parrot • 12/17/2019, 2:17:43 PM
The specs for the AP850 say 1" tweeter. The owners manual spec. Says 2". Why are they different and which one is right?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Parrot:
Thank you for bringing to our attention. The Spec listed on the web page (1") is most current.
TL/4839
Jamie • 12/17/2019, 2:17:43 PM
I have a pair of AP840s on a deck powered with an Onkyo receiver that also powers another set of AP850s inside the house. Another connected deck needs sound. I am thinking of getting your new outdoor bluetooth wireless subwoofer and powering a new set of AP850s using that. I may also want to hook up the other pair of AP840s to the subwoofer so that all decks will use the same source. Hopefully there will be no latency. Do you think that will work?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jamie:
This Outdoor Bluetooth Subwoofer should work perfectly for your application. There should be no latency issues. There is a Internal 4.1 power amplifier built into the Sub Chamber . One channel dedicated to the Sub woofer and two stereo outputs, one for your existing AP840 and the other for the new pair of AP850. You will have a single source input, the Bluetooth for both locations. You could even add a volume control for each stereo pair if you want more control, Check out the OVC100.
Good luck
TL/4845
Alberto • 12/17/2019, 2:17:43 PM
the specifitacion says that the sensitivity is 90dB, can I suppose is 90dB @ 1w 1m ?? thank you
Customer Service • 12/17/2019, 2:17:43 PM
Hi Alberto:
Yes, sensitivity is 90dB 1 watt at 1 meter. Very efficient!
TL/4901