SKU: OSD-BTP-525-PAR
OSD BTP5255.25" Bluetooth 5.0 Outdoor Patio Speaker Pair 100W, IP54 Rated, Black or White
Use Code 'SAVEOSD'
OSD Audio's BTP-525 Bluetooth patio speakers from Outdoor Speaker Depot - an easy plug and play choice for outdoor sound systems. These speakers are IP54 rated and feature a frequency response of 38Hz-20kHz +/- 10dB, making them perfect for any outdoor setting. With a power handling of 100W, impedance of 8 Ohms, and sensitivity of 89 db, these speakers deliver a powerful, clear sound. The speakers come equipped with Bluetooth version 5.0 and are compatible with A2DP standard, making it easy to connect your Bluetooth-enabled device to the speakers. The gold-plated spring-loaded binding posts and full motion bracket make for easy installation. The speakers also feature a composite resin low resonator cabinet and powder-coated rust-resistant aluminum grille, making them durable and long-lasting. The power supply length is 3' 5" from plug to transformer and 15' 5" from transformer to speaker. The speakers come in a pair and are available in black or white. The speakers also come with a 1 year warranty. Weather resistant cap is added to protect the speaker connection and additional protection near the ocean is suggested by applying Clear Coat (spray paint only, not brush) to the grills.
Helpful tips:
1) Determine the ideal location where the Patio Speakers are not exposed directly to the elements. Note: speakers typically should be placed between 8 to 12 feet apart for proper stereo separation.
2) The Master Patio Speaker needs to be located near an AC outlet where you can connect the Power Supply to the Master Speaker in order provide the electrical current needed for the Internal Stereo Power Amplifier and Bluetooth Receiver.
3) The Pairing speaker must be connected to the Master Speaker with the 10-foot Speaker Cable that is supplied with the kit. The length of the speaker cable can be cut down for an exact fit but should not be extended beyond 30 feet
What's Included: Water Resistant Power Adapter, Speaker Wire, and Waterproof Wire Connectors
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 5.25" 2 Way Bluetooth Patio Speakers
- IP54 Rated
- Woofer: 5.25" Water Resistant Treated Paper
- Tweeter: 0.5" Dome
- Frequency Response: 38Hz-20kHz +/- 10dB
- Power Handling: 100W
- Impedance: 8 Ohms
- Sensitivity: 89 db
- Bluetooth Version: 5.0
- Compatible with A2DP Standard
- Powder-coated Rust Resistant Aluminum Grille
- Gold-Plated Spring-Loaded Binding Posts
- Full Motion Bracket
- Composite Resin Low Resonator Cabinet
- Power Supply Length: Plug to Transformer - 3' 5", Transformer to Speaker - 15' 5"
- Unit Dimensions: (L x H x D) 10" x 6.5" x 6.5"
- Sold As: Pair
- Colors Available: Black or White
- Weight: 12 lbs
- Warranty: 1 Year
View Product Information
104 Questions asked
Have a Questions?
What's on your mind?
Tom • 12/17/2019, 2:17:43 PM
Hey OSD...How is the non-master speaker powered (if the master is the only one of the pair that is powered)? Just have to note, I purchased all of my in-ceiling speakers, in-wall volume controls, and a speaker selector (after a whole-house renovation) from OSD and I am very pleased with both the cost and quality! Thank you OSD!
Customer Service • 12/17/2019, 2:17:43 PM
Hi Tom:
The way the BTP 525 Master/satellite works is the master speaker has both the Bluetooth Receiver and 2 channel stereo amplifier built in which needs to have AC power supplied to it. Then one channel is connected to the internal speaker of the master and a second 2 conductor (+/-) you add a speaker cable to connect the Master to the Satellite speaker. So the only true wireless connection is between your Bluetooth enabled device and the Bluetooth Receiver built into the Master Speaker. We are introducing a Outdoor Powered Subwoofer with built in Bluetooth Receiver and a 4.1 powered Amplifier so you can connect any two pair of speakers to the Powered Subwoofer.
I hope that answers your question.
TL/4723
Shawn • 12/17/2019, 2:17:43 PM
I purchased the BTP 525 and I believe the power adapter went out. The speakers are plugged in and they wont turn on anymore but they were working fine recently . Do you sell a replacement power source?
Customer Service • 12/17/2019, 2:17:43 PM
HI Shawn:
You should contact our RMA department. They do have replacements.
TL/4675
Karl • 12/17/2019, 2:17:43 PM
Will these speakers work with a Bluetooth transmitter plugged into my receiver headphone jack? My A/V receiver can receive Bluetooth but does not transmit.
Customer Service • 12/17/2019, 2:17:43 PM
HI Karl:
Sure it can, the device you connect to the headphone output is a Bluetooth transmitter and would sync up with the BTP525 internal receiver of the master speaker.
TL/4826
Mike • 12/17/2019, 2:17:43 PM
I've had a pair for just over a year. Suddenly the speakers will no longer sync with my phone. You can hear a slight hissing sound coming from speakers but anytime I try to re-sync them....no sound telling me they have paired. I've tried everything I can think to get them to work again but to know avail. Any thoughts?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Mike:
Contact our customer service directly and discuss your problem. Call us at 1-562-697-2600, Sales department. Ask for Aaron, he is our Bluetooth guru.
TL/4832
Paul • 12/17/2019, 2:17:43 PM
I purchased these 2 years ago and they've worked great. Recently however something must have happened and when I turn them on all I get is a clicking sound. I'm wondering if it's the power supply or the speakers. If it's the power supply do you sell a replacement power supply for these speakers?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Paul:
We do have Power Supplies for sale. Contact the OSD customer Service department. They maybe be able to help you on the clicking noise you are experiencing.
TL/4864