Introducing the BTP650 Bluetooth Patio Speaker Pair, the perfect addition to your deck or patio. These sleek and modern speakers are designed to withstand all weather conditions with an IP54 rating and are constructed with a water-resistant treated paper woofer and a 1" silk dome tweeter. With a power handling of 150W, you can enjoy powerful sound no matter the occasion.
The speakers feature Bluetooth Version 5.0 and are compatible with A2DP Standard, making it easy to connect to any Bluetooth-enabled device. The powder-coated rust-resistant aluminum grille and gold-plated spring-loaded binding posts add to the durability of the speakers, while the composite resin low resonator cabinet provides clear and crisp sound.
The set includes one main speaker and one pairing speaker, and comes with a full-motion bracket for easy installation. The power supply length is 3' 5" from plug to transformer and 15' 5" from transformer to speaker. The speakers are available in black or white and come with a 1-year warranty. Sold as a pair.
Helpful tips:
1) Determine the ideal location where the Patio Speakers are not exposed directly to the elements. Note: speakers typically should be placed between 8 to 12 feet apart for proper stereo separation.
2) The Master Patio Speaker needs to be located near an AC outlet where you can connect the Power Supply to the Master Speaker in order provide the electrical current needed for the Internal Stereo Power Amplifier and Bluetooth Receiver.
3) The Pairing speaker must be connected to the Master Speaker with the 10-foot Speaker Cable that is supplied with the kit. The length of the speaker cable can be cut down for an exact fit but should not be extended beyond 30 feet
What's Included: Water Resistant Power Adapter, Speaker Wire, and Waterproof Wire Connectors
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 6.5" 2 Way Bluetooth Patio Speakers
- IP54 Rated
- Woofer: 6.5" Water Resistant Treated Paper Woofer
- Tweeter: 1" Silk Dome
- Frequency Response: 32Hz-20kHz +/- 10dB
- Power Handling: 150W
- Sensitivity: 90db
- Impedance: 8 Ohms
- Bluetooth Version: 5.0
- Compatible with A2DP Standard
- Powder-coated Rust Resistant Aluminum Grille
- Gold-Plated Spring Loaded Binding Posts
- Full Motion Bracket
- Composite Resin Low Resonator Cabinet
- Power Supply Length: Plug to Transformer - 3' 5", Transformer to Speaker - 15' 5"
- Unit Dimensions: (L x H x D) 11.9" x 7.8" x 7.6"
- Sold As: Pair
- Colors Available: Black or White
- Weight: 8.5" lbs each
- Warranty: 1 Year
202 Questions asked
Have a Questions?
What's on your mind?
Fred • 12/17/2019, 2:17:43 PM
can I buy another slave speaker
Customer Service • 12/17/2019, 2:17:43 PM
Hi Fred:
The BTP650 is a closed system limited to the Master and one satellite speaker. There are some newer smartphones which allow you to sync up with two different Bluetooth receivers. So you could have 2 pairs of the BTP650. Another option to consider especially if you have not purchased the BTP650 kit would be our BOM4.1 which is an Outdoor powered subwoofer with a 100-watt amplifier for the Internal sub and four 60 watts a channel hookups so you could connect either a pair of AP650 (the identical speaker to the PTP650 Satellite) or any other two pairs pair of passive speakers (2 pairs of Rock speakers or Garden speakers etc.). Or mix and match say a pair of patio speakers and a pair of Rock Speakers it would all depend on your application.
Good luck
TL/5009
Will • 12/17/2019, 2:17:43 PM
What is the diameter of the weather-proof power connector? I ordered these yesterday and am looking to install conduit for the power cord over the weekend; can I fit the power cord through a 1/2" conduit (0.62" ID)? Thanks.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Will:
The total length of the power cord is around 18 to 19 feet. At one end is a three prong AC plug and about 3.5' to the actual Waterproof IP67 Power Supply block. Then 15 or so feet to the connection with the pigtail that comes out of the back of the Master Speaker. This terminated with a connector at least a 1/2" in diameter and there is a Ferrite core about 6" in from the connector that appears closer to 3.4". So a 1/2" conduit might not work. I installed a BTR650 last Saturday which I can go measure just to make sure.
TL/5015
JT • 12/17/2019, 2:17:43 PM
I received these speakes today I need to extend the speaker wire 10 more feet Can I just get a bigger gauge? If not ,do you have suggestions?
Customer Service • 12/17/2019, 2:17:43 PM
Hi JT:
They come with 16 gauge wire, you can switch up to 14 gauge if you like. The hole in the Push terminal is perfect for 16 gauge but I believe you can squeeze 14 in.
TL/5017
JT • 12/17/2019, 2:17:43 PM
I received these speakes today I need to extend the speaker wire 10 more feet Can I just get a bigger gauge? If not ,do you have suggestions?
Customer Service • 12/17/2019, 2:17:43 PM
Hoping 50’ of 16AWG will work.
Justin • 12/17/2019, 2:17:43 PM
Can these speakers not only be hard wired, but used with Bluetooth as well?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Justin:
These are Bluetooth only there is no other input available. You are connecting with your Bluetooth device to the master speaker which has the Bluetooth Receiver and 2 channel amplifier built-in with one channel connected to the internal speaker. A second connection is for the passive satellite speaker which connected to the Master by a two conductor stereo wire. The amp is only meant to drive the two speakers with no other connection besides the Bluetooth. The Rocks, Frogs and Patio Speakers are all the same setup. We do have a new Bluetooth Sub with a 100-watt amplifier and four channel outputs (2 stereo pairs 60 watts per channel). You decide which two pairs of passive speakers. You could connect 2 pairs of AP650 (identical to the BTP650) or a single pair of AP650 and a pair of RS670 Rock speakers. Check out the model BOM4.1.
TL/5035