SKU: OSD-BTP-650-PAR
OSD BTP6506.5" Bluetooth 5.0 Outdoor Patio Speaker Pair 150W, IP54 Rated, Black or White
Use Code 'SAVEOSD'
Introducing the BTP650 Bluetooth Patio Speaker Pair, the perfect addition to your deck or patio. These sleek and modern speakers are designed to withstand all weather conditions with an IP54 rating and are constructed with a water-resistant treated paper woofer and a 1" silk dome tweeter. With a power handling of 150W, you can enjoy powerful sound no matter the occasion.
The speakers feature Bluetooth Version 5.0 and are compatible with A2DP Standard, making it easy to connect to any Bluetooth-enabled device. The powder-coated rust-resistant aluminum grille and gold-plated spring-loaded binding posts add to the durability of the speakers, while the composite resin low resonator cabinet provides clear and crisp sound.
The set includes one main speaker and one pairing speaker, and comes with a full-motion bracket for easy installation. The power supply length is 3' 5" from plug to transformer and 15' 5" from transformer to speaker. The speakers are available in black or white and come with a 1-year warranty. Sold as a pair.
Helpful tips:
1) Determine the ideal location where the Patio Speakers are not exposed directly to the elements. Note: speakers typically should be placed between 8 to 12 feet apart for proper stereo separation.
2) The Master Patio Speaker needs to be located near an AC outlet where you can connect the Power Supply to the Master Speaker in order provide the electrical current needed for the Internal Stereo Power Amplifier and Bluetooth Receiver.
3) The Pairing speaker must be connected to the Master Speaker with the 10-foot Speaker Cable that is supplied with the kit. The length of the speaker cable can be cut down for an exact fit but should not be extended beyond 30 feet
What's Included: Water Resistant Power Adapter, Speaker Wire, and Waterproof Wire Connectors
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 6.5" 2 Way Bluetooth Patio Speakers
- IP54 Rated
- Woofer: 6.5" Water Resistant Treated Paper Woofer
- Tweeter: 1" Silk Dome
- Frequency Response: 32Hz-20kHz +/- 10dB
- Power Handling: 150W
- Sensitivity: 90db
- Impedance: 8 Ohms
- Bluetooth Version: 5.0
- Compatible with A2DP Standard
- Powder-coated Rust Resistant Aluminum Grille
- Gold-Plated Spring Loaded Binding Posts
- Full Motion Bracket
- Composite Resin Low Resonator Cabinet
- Power Supply Length: Plug to Transformer - 3' 5", Transformer to Speaker - 15' 5"
- Unit Dimensions: (L x H x D) 11.9" x 7.8" x 7.6"
- Sold As: Pair
- Colors Available: Black or White
- Weight: 8.5" lbs each
- Warranty: 1 Year
View Product Information
202 Questions asked
Have a Questions?
What's on your mind?
reid • 12/17/2019, 2:17:43 PM
will these last if installed in the open?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Reid:
Yes these speakers can be exposed directly to the elements. You will notice they are a totally sealed design with no port to worry about. It has a conformity rating of IPX6 which is very good against both dust and exposure to water. Having said that you typically will get extended life from the speakers if you do shield them from the elements and even take them in side when you know your not going to be using them for extended periods.
Good Luck
TL/3775
Ryan • 12/17/2019, 2:17:43 PM
I want to hide all wires and transformer. Will this affect performance in any way? Will the transformer be affected if it gets covered or even insulated and placed underground?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Ryan:
I believe you are referring to the Power Supply that supplies AC power to the Master Speaker. I believe you can hide it. since It is totally sealed.You can purchase waterproof boxes and your independent hardware store. Good question...
TL/3778
christopher keables • 12/17/2019, 2:17:43 PM
can a subwoofer be connected to these speakers?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Christopher:
The Bluetooth connection is made between your Bluetooth enabled device and the Bluetooth Receiver built into the Master Speaker that also features a stereo amplifier that drives both the internal speaker and the satellite speaker. There is no way to tap into that signal since the enclosure is sealed. I do not believe their is away to add a sub-woofer in its present setup. It might be interesting if we could design an internal amplifier with a low pass output in addition to the current stereo amp, like 2.1 system. I should look into that.
Thanks for the question
TL/3808
christopher keables • 12/17/2019, 2:17:43 PM
can a subwoofer be connected to these speakers?
Customer Service • 12/17/2019, 2:17:43 PM
I DID IT.
I opened a brewery and taproom this year. A "bargain" quote from a sound engineer was $6,000 for speakers, amps, etc., etc. That simply was not in our startup budget, so I had to get creative. I installed the bluetooth speakers on the high ceiling in a corner. Then i cut the connecting wire between the two speakers. (shame on me). I ran that into the back of a powered sub as a "speaker-level in" and back out to the other speaker. I realize this would probably cut out the low frequency to that other speaker based on the sub's crossover. But I just went with it. And you know what? It works. It works bloody well. The mid to high range of these speakers is their strong point. The reinforcement from the sub is (IMHO) entirely necessary because they are lacking in low end. It sounds so good and has done so for the last 11 months. And the completely wire free bluetooth connection is so clean and easy.
Since I already had a 90 watt sub, my only expense was the speakers. So for $169 I had a really solid sound system. That's way cheaper than $6,000.
christopher keables • 12/17/2019, 2:17:43 PM
can a subwoofer be connected to these speakers?
Customer Service • 12/17/2019, 2:17:43 PM
If you had a powered subwoofer or subwoofer amplifier with a speaker level input then you could potentially do so. You would run the speaker wire from the main powered patio speaker to the subwoofer inputs and then back out to the second speaker. The amp that they sell here would work. Only downside is that you would need to have the amplifier in a place protected from water/elements.
http://www.outdoorspeakerdepot.com/subwoofer-amplifier.html