SKU: OSD-PC-640-PAR
OSD PC6406.5" Hanging Pendant Speaker, Optional 70V Tap w/ Reinforced Cable Suspension, Black or White
Use Code 'SAVEOSD'
Great for hanging application on your audio needs, OSD Audio's series of pendant speakers are as unique in style as they are in function. Available in black or white, the PC640 pendant speaker includes a 6.5 woofer,1-inch tweeter and high power handling capability for audiophile sound quality, making this speaker ideally suitable open space environments such as malls, airports, or any indoor space with high vaulted ceilings. Fashioned after modern lighting fixtures, the PC640 pendant includes 140 degrees wide-dispersion coaxial driver for even coverage as well as low-resonance cabinet structure.
Features:
- Ideally suited for airports, shopping malls and restaurant music/paging systems
- Easily accessible 8- ohm/70 volt tap
- Reinforced cable suspension safety system
- Available in White or Black
- Please note brown wire is negative and blue wire is positive
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 6.5" 2-Way Hanging Pendant Speaker (70V/8 Ohm)
- Woofer: 6.5" Polypropylene Cone with Rubber Surround
- Tweeter: 1" Dome
- Frequency Response: 60Hz-20kHz
- Power Handling: 100W
- Sensitivity: 92 dB
- Impedance: 8 Ohms/ 70V
- Dispersion Angle: 140°
- Wattage Taps:
- 70V Taps - 20W, 10W, 5W, 2.5W, or 8 Ohms
- 100V Taps - 20W, 10W, or 8 Ohms
- Reinforced Cable Suspension Safety System
- Safety Hooks Included
- (Please note: Brown Wire is Negative, Blue Wire is Positive)
- Diameter & Depth: 10" x 10" x 8.5"
- Sold As: Single
- Colors Available: Black or White
- Weight: 6.65 lbs
- Warranty: 10 Years
View Owner's Manual
13 Questions asked
Have a Questions?
What's on your mind?
Kurt • 12/17/2019, 2:17:43 PM
I have a Yamaha EMX 66 powered mixer (120v 250W 300VA) and would like to drive these speakers on the "monitor" circuit of the unit. Will this work?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Curt:
Maybe I am missing something but the Monitor circuit is a 1/4 inch connection, I am assuming is a signal level (pre amplified) output that is meant to go into a power Amplifier. I believe it would be 1/4" balanced connection to either a 1/4" balanced input or 1/4" to XLR connection. And appears to be a Stereo 1/4" output.
Outputs - Other: 2 x 1/4" monitor, 1 x 1/4" sub woofer, 1 x 1/4" foot switch
I think you need to confirm the Monitor output. We do offer amplifier with balanced line inputs under the CARVER brand name. You should connect with Yamaha regarding the Monitor output is pre amp stereo (balanced). If it stereo unbalanced your best bet would be going to our OSD AMP200 then connecting the pendant speakers. You could connect two to three pairs of pendants to the AMP-200.
Let me know what you find out; tim@osdaudio.com
TL/4763
Kiel • 12/17/2019, 2:17:43 PM
How do I get sound to my OSD pendant speakers? I they are connected to red & black wires running to the back of the restaurant. There is 1 red & 1 black wire to connect to, do I need a preamp or can I convert those wires to aux & play my iPod through the pendant speakers? Thank u for your assistance.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Keil:
You need a power amp to drive the Pendant speaker and you will need 2 for stereo. Checkout the NERO Integrated amplifier that can be your multi source. You can use the built in Bluetooth Receiver or connect your iPod to the aux input. Or add a connection to your satellite box to play the audio from your TV. There is a handy dandy remote control as well and even a sub woofer output. Very flexible and works very well with your pendant speakers. How many zones do you have for the restaurant. I can help with the setup... tim@osdaudio.com
Note: run the pendant speaker as 8 ohm for this setup.
TL/4887
Jeremy Van Buskirk • 12/17/2019, 2:17:43 PM
What is the weight of the unit?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jeremy:
Gross shipping weight is 8 lbs. Net would be around 5.5 lbs.
TL/5362
- < Previous
- 1
- 2
- 3