SKU: OSD-TSM-19-241
LED/LCD/Plasma Tilt & Swivel Full Motion 23" - 42" OSD TSM-19-241
The TSM-19-241 is the Swiss Army knife of TV mounts. Incorporating the latest features and technologies, it's perfect for plasmas, LCDs and the latest LED TVs. Flat wall and corner friendly, the unit will accommodate flat panels measuring from 23" to 42" and up to 66 pounds. With 15-degree tilt and 90-degree swivel, there is no bad seat and its super slim profile retracts to less than two inches. The patented design lets you install the mount with just basic tools and of course it's VESA compliant so it will fit the mounting holes of your TV. Upgrade features include cable management so you can run wires ever so discreetly and the beautiful silver and black finish make us wonder why any one would want cover this mount with a TV (just kidding).
Warning: The installer of these products must verify that the mounting surface, ceiling, or wall will safely support the combined weight of all attached equipment and hardware. We will not be held liable for the improper use or installation of these products.
Warning: The installer of these products must verify that the mounting surface, ceiling, or wall will safely support the combined weight of all attached equipment and hardware. We will not be held liable for the improper use or installation of these products.
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Our Best Series of Full Motion Universal Wall Brackets ' Medium Monitor
- Single Arm Design, Fits LED and Thin LCD Medium
- Monitor Sizes: 23' to 42'
- Profile from 1.77' to 9.44' / 45mm to 240mm
- VESA Compliant
- 75x75/100x100/200x100/200x200/400x200
- Supports Flat Panels up to 66lbs. / 30kgs
- Tilt +15' to -15', Swivel of 180' and +3'/-3' Level Adjustment
- GS Rated/Patent Approved
- Limited Lifetime Warranty
2 Questions asked
Have a Questions?
What's on your mind?
Vadim • 12/17/2019, 2:17:43 PM
What diameter of the aperture, for the screws of two TV brackets? (it is very necessary information, because very often diameter of the TV screws is more than diameter of an apertures in brackets)
Customer Service • 12/17/2019, 2:17:43 PM
Hi Vadim,
The holes in question on the mounting arms measure as follows:
Round hole is 5/16" and the oblong holes at the bottom are 5/16" wide and 1 7/8" long.
Note all our Mounts are VESA certified which means they will work with all major brands of Flat Panel TV and monitors including Plasma, LCD and LED. Each monitor mount comes with a generous assortment of screws to accommodate any application. All of our mounts are rated for monitor size, TV weight (when properly mounted into a stud), Profile and VESA size. Also if you have a 42" TV as an example and you have a choices: 23" to 42" and another 26" to 47". We recommend going with the 26" to 47" .
TL/MA - 1559
Tom • 12/17/2019, 2:17:43 PM
Is this an outdoor rated mount?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Tom:
None of our mounts are rated for outdoor use especially if directly exposed to the elements.
TL/4480