SKU: OSD-ATM-7
OSD ATM77x Zone Automatic Speaker Selector w/ Remote Control IR Code
New improved we dim the blue led indicator light so it is not too bright at night. Speaker selector switches allow you to connect multiple pairs of speakers to your stereo receiver or amplifier. The ATM 7-Zone Speaker Selector with Remote Control can control up to seven pairs of speakers so you can listen to music in multiple rooms simultaneously.
ATM 7-Zone Speaker Selector includes an IR remote control. With a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to any of your favorite universal remote control with the factory code we provide.
ATM 7-Zone Speaker Selector includes an IR remote control. With a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to any of your favorite universal remote control with the factory code we provide.
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Selector Type: 7 Zone Speaker Selector w/ IR Remote Control
- # of Zones or Speaker Pairs: 7
- Single Source
- Impedance Protection: No
- Maximum Operating Range: 400W
- Input Source: 7 Inputs to Speaker A/B or 2 Sources to 7 Zones
- Input/ Output Connector Type: Multi-way Binding Posts
- Last Call Back-up Memory Function
- Rack Mountable: Yes, 1.5RU
- Remote Control: Yes
- Dimensions (L x H x D): 16.5" x 3" x 7.87"
- Weight: 7 lbs
- The ATM7 does not have any Internal Impedance Matching Protection
- Note: We recommend adding Impedance Matching Volume Controls for each zone if you are planning to play more than two 8-ohm pairs of speakers at the same time.
- Warranty: 2 Years
Infrared Emitter Information and Installation Guide:
- With 5 meters cable length
- With 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface.
View Owner's Manual
113 Questions asked
Have a Questions?
What's on your mind?
Jung • 12/17/2019, 2:17:43 PM
Max. Power handle is 400W means for each zone? or all 7 zone total Max. power is 400W?
please can you let us know more clear for this part?
Thank you
Customer Service • 12/17/2019, 2:17:43 PM
Hi Jung,
Any single channel on the ATM-7 would be 100W
CL 1343
Brian • 12/17/2019, 2:17:43 PM
Any way to incorporate this speaker selector using Sonos Connect Amp? I currently am trying to figure a work around to having my home prewired with in ceiling speakers all wired to central basement location. I would like not to have to purchase separate Sonos amps right away to make the most of my system. This seems like it may work but then I read that you need to use impedance matching volume controls with this device?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Brian:
The ATM7 will not provide any impedance matching, that is why we recommend using with Impedance Matching Volume Controls.The better choice for your applications would be to use our TSM8 which features Internal Transformers (selectable based upon how many speaker you connect) to do the impedance matching which would be key for your SONOS Connect Amplifier to operate safely. It is also more affordable than the ATM7.
TL - 1439
Brandon • 12/17/2019, 2:17:43 PM
Are there rack ears available for this product?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Brandon,
Yes, the rack ears are available. Please call us to order and specify you want the rack ears.
TL/MA - 1563
Greg • 12/17/2019, 2:17:43 PM
Can this be used safely with a vacuum tube amplifier as one of the sources? Will the tube amp still see a load if the speakers are switched to the second source?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Greg,
This speaker selector needs to utilize impedance matching volume controls to handle protection for your overall system. Whether you use a tube amp or just a solid state amplifier, the same rules apply. If you plan on listening to two or more zones at a time, you need to have some sort of Impedance matching so the amplifier (s) see an acceptable load.
TL/MA - 1588
Wilson Williams • 12/17/2019, 2:17:43 PM
Hi, I have a surround sound stereo, model RTD 317W withsix speakers. 4 x surround channel speaker - external - wired ¦ 1 x center channel speaker - external - wired ¦ 1 x subwoofer - external - wired. The amplifer output is 32 Watt - 4 Ohm - at 1 kHz - THD 10% - 4 channel(s) ( surround ) ¦ 32 Watt - 4 Ohm - at 1 kHz - THD 10% - 1 channel(s) ( center ) ¦ 40 Watt - 3 Ohm - at 100 Hz - THD 10% - 1 channel(s) ( subwoofer ). Now I have 2 of the souround sound speakers on the outside and the others in the house. Could this system be able to seperate those speakers inside from outside or those outside from inside ? or allow all to play?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Wilson,
The ATM-7 may not be the right speaker selector for your application. To separate the two zones, consider the SSVC2 speaker selector, which will allow both zones to play at the same time. Also because it is a dual source unit, you have the option of playing another source simultaneously.
CL/MA 1613