SKU: OSD-ATM-7
OSD ATM77x Zone Automatic Speaker Selector w/ Remote Control IR Code
New improved we dim the blue led indicator light so it is not too bright at night. Speaker selector switches allow you to connect multiple pairs of speakers to your stereo receiver or amplifier. The ATM 7-Zone Speaker Selector with Remote Control can control up to seven pairs of speakers so you can listen to music in multiple rooms simultaneously.
ATM 7-Zone Speaker Selector includes an IR remote control. With a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to any of your favorite universal remote control with the factory code we provide.
ATM 7-Zone Speaker Selector includes an IR remote control. With a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to any of your favorite universal remote control with the factory code we provide.
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Selector Type: 7 Zone Speaker Selector w/ IR Remote Control
- # of Zones or Speaker Pairs: 7
- Single Source
- Impedance Protection: No
- Maximum Operating Range: 400W
- Input Source: 7 Inputs to Speaker A/B or 2 Sources to 7 Zones
- Input/ Output Connector Type: Multi-way Binding Posts
- Last Call Back-up Memory Function
- Rack Mountable: Yes, 1.5RU
- Remote Control: Yes
- Dimensions (L x H x D): 16.5" x 3" x 7.87"
- Weight: 7 lbs
- The ATM7 does not have any Internal Impedance Matching Protection
- Note: We recommend adding Impedance Matching Volume Controls for each zone if you are planning to play more than two 8-ohm pairs of speakers at the same time.
- Warranty: 2 Years
Infrared Emitter Information and Installation Guide:
- With 5 meters cable length
- With 3.5mm mono standard plug
- With self-adhesive tape for quick and easy fixing on any hard, clean & dry surface.
View Owner's Manual
113 Questions asked
Have a Questions?
What's on your mind?
tephen • 12/17/2019, 2:17:43 PM
I have a OSD ATM -7.....this is the 2nd unit the first unit died within 90 days.... you replaced it with a new unit has worked fine until now...unit it lights up but nothing comes out of any speaker connected to it...is this restable or repairable?
stephen Abrams
sca7702@gmail.com
Customer Service • 12/17/2019, 2:17:43 PM
Hello,
Thank you for contacting us. If this has happened more than once, it's likely there may be an issue elsewhere in your setup. Let's do some troubleshooting to find out. First, what kind of amplifier are you running to the speaker selector? Secondly, since the ATM-7 doesn't have impedance protection, you should be running impedance matching volume controls for each zone. Do you have impedance matching volume controls?
Tim • 12/17/2019, 2:17:43 PM
Hello,
Have you heard of a universal remote that your ATM-7 speaker selector will work with?
Thanks!
Tom
Customer Service • 12/17/2019, 2:17:43 PM
Hi Tom:
If you have the current remote that comes with the ATM7 you should be able to use any Universal Remote that has Learning capability. So as long as you have the current Remote Control to interface with the Universal Remote that should work. The problem arises when you have lost the ATM-7 remote than you need the Head Code and possibly the Hex codes which pertain to the actual buttons. We will post our findings as soon as we clarify with our Factory Engineers.
TL/3679
Tim • 12/17/2019, 2:17:43 PM
Hello,
Have you heard of a universal remote that your ATM-7 speaker selector will work with?
Thanks!
Tom
Customer Service • 12/17/2019, 2:17:43 PM
Harmony Hub actually has the ATM7 listed and all the functions. Allows you to control the ATM7 with the Harmony smartphone app. Huge!
Roy • 12/17/2019, 2:17:43 PM
I'm looking for an A/B speaker selector with remote capabilities (IR preferred), that can take the A/B source to four or more outputs, and A/B source can be selected at the same time on different outputs simultaneously(with volume control preferred, but not necessary). So I can play source A on output one and source B on outputs two, three and four, or other combinations, but A/B can be selected to multiple output simultaneously.
Is there something like that?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Roy:
We have the ATM7 which IR controlled and up to 7 zone plus dual source, but limited to a single source for all at one time.
The SSVC6D is six zone with Dual Source (and built in Volume controls) but no IR and only a single master A/B switch so one source for all not a choice of two.
The SSVC4 is a four zone speaker selector with volume controls and Dual source with individual A/B switches one per zone so you can select A or B on all four zones so you can play both sources at the same time.
The DSM6 is a six zone speaker selector with no Volume Controls but does have Dual Source with the individual A/B source switch per zone. The DSM4 is the same as the DSM6 but two less zones.
That is what I have that is anywhere close.
TL/3719
Danny F; Kaye • 12/17/2019, 2:17:43 PM
Does anyone know where one can find rack ears for the ATM7? I've looked around quite extensively finding nothing for the 1.5U size.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Danny:
We do not offer rack Ears specifically for the ATM7 1.5 RU size. What Rack are you using and do they offer a universal Shelf for components like this without optional Rack ears. Typically the universal shelf's are for either 1.0 RU or 2.0 RU.
I looked extensively on line as well. I saw a good selection of Universal shelves at Mid Atlantic Rack accessories.
Sorry about that...
TL/3889