View Owner's Manual
SKU: OSD-ICE600TTWRS
OSD ICE600TTWRS6.5" Weather-Resistant Outdoor/ Indoor Dual Tweeter Stereo In-Ceiling Speaker, Single
Relax in the tub and enjoy beautiful sound with this water-resistant 6.5" in-ceiling speaker! With 150W power handling, this in-ceiling speaker is the solution to bringing quality audio to high moisture areas, and is constructed of durable, moisture-resistant materials for use in high-humidity areas such as bathrooms, laundry rooms, kitchens, patios, under outdoor eaves or covered porches. Sold as a single speaker, the ICE600TTWRS offers excellent stereo sound and takes up half the space of a standard speaker pair, while still delivering smooth, 2-channel sound. The aluminum grill cover is rust-resistant for wet application. This weather-resistant speaker was created specifically for an application where you have a right (+/-) and left (+/-) stereo signal coming into a room/ space where you only have space for a single speaker. Just connect one pair of conductors to one set of inputs (+/-) and the second pair of conductors to the second set of inputs.
What Is a Dual Voice Coil Ceiling Speaker?
A Dual Voice Coil (DVC) Ceiling Speaker uses a special voice coil cone design that allows both channels of a stereo system to drive one cone. Sounds complicated but it's not. Basically, a DVC speaker plays both right and left channels through one speaker cone. You get both channels but without the acoustic separation that happens with two speakers. There are places like bathrooms, closets or hallways that just can’t accommodate multiple speakers, so a DVC speaker solves the problem and produces great sound.
How Does this Speaker Mount in the Ceiling?
Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.
What Type of Speaker Wire and What Gauge?
Wiring is not included with in-ceiling speakers so you will have to purchase some. We recommend our OSD Audio CL3/FT4 cable that is UL (fire) rated for in-wall and outdoor speaker installs. This type of cable includes a heavy-duty outer jacket approved for in-wall/in-ceiling installation. The high-quality plastic jacket is also very flexible so it's easy to run the wires inside the wall. As for the gauge, for runs up to 100 feet for background music, 16-gauge will be fine. If the run is approaching or exceeding 100 feet, we suggest 14-gauge wire.
Testing the Sound Quality of In-Ceiling Speakers
Many customers like to test the sound quality of their new OSD Audio in-ceiling speakers before they install them. Keep in mind, however, that these flush-mount speakers are designed to be used in the wall or ceiling. Uninstalled in-wall/in-ceiling speakers will sound weak and tinny because without the proper enclosure (in this case your house wall) the speaker can’t produce the sound pressure level it needs. If you want to try them out, we recommend mounting the in-ceiling speakers into a box of about 3 cubic ft. or larger; or simply mount them in the ceiling and then listen. This will give you an accurate measure of the sound quality.
For a retrofit installation, no construction bracket is needed.
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 6.5" Weather Resistant Indoor/Outdoor Dual Tweeter Trimless Ceiling Speaker
- Woofer: 6.5" Polypropylene Cone with Santoprene Surround
- Tweeter: Dual 1" Polycarbonate Dome
- Frequency Response: 48Hz-20kHz
- Power Handling: 150W
- Sensitivity: 89 dB
- Impedance: 8 Ohms
- Weather-resistant for High Moisture Situations
- Perfect for Outdoor or Indoor Use
- Dual Voice Coil (DVC) Provides Stereo Sound Within One Speaker
- Spray Paintable Rust-Resistant Aluminum Grille Included
- Inputs: Spring Loaded Binding Posts
- Install-friendly Dog Ear Installation Brackets
- See New Construction Brackets For Compatibility
- Diameter & Depth: 9.06" x 4.33"
- Cutout Diameter: 7.95"
- Sold As: Single
- Warranty: 10 Years
24 Questions asked
Have a Questions?
What's on your mind?
pete • 12/17/2019, 2:17:43 PM
How many watts does my amplifier need to be to power this speaker sufficiently? I was going to purchase this from your site A0240 80 Watt Stereo Amplifier or Pyle Home PVC8U with 75 watts.
Customer Service • 12/17/2019, 2:17:43 PM
Hi Pete,
Either one of these amplifier will easily power this stereo speaker. In both cases, you connect both of the voice coils (right and left input) of the ICE600TTWRS from either right and left (+/-) outputs of the amplifiers.
TL/MA
Mindy • 12/17/2019, 2:17:43 PM
will mini 30watt amp power this speaker?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Mindy:
This speaker should work fine. Just remember to connect both right and left voice coils of the speaker from the right and left output of the Mini Amp. It is best to use our CL3 16/4 speaker wire which features all four conductors (right and left +/-) in one convenient jacket that is approved for indoor/outdoor, in wall rated and direct burial.
TL#1232
Adam • 12/17/2019, 2:17:43 PM
I have Danon receiver and I have about 900 sq ft covered patio. the area is 15'x60' long? HOw many speakers do you recommend? What kind of speaker do you recommend?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Adam,
The amount of speakers will depend on where you place the speakers; however, if you have room for two pairs, we highly recommend the ICE600wrs (four speaker total). The TT is a single stereo speaker that has a left and right channel all in one speaker. This gives you much more installation flexibility in areas where you can’t fit two speakers in a particular location or two speakers will be more than 20 feet apart. You could also go with our ICE600WRS 6.5” weather-resistant speakers, but again it depends on where you plan to install them.
CL/MA 1652
Bill • 12/17/2019, 2:17:43 PM
I will be installing 3 pairs of speakers on an exposed lanai. Do I have to run left and right channels to these speakers?
Customer Service • 12/17/2019, 2:17:43 PM
Hi Bill,
You are correct. The ICE600TT is a Dual Voice Coil model that gives you stereo sound from a single speaker. You will run a left and right connection just like you would if you were connecting a pair.
CL/MA 1758
Howie • 12/17/2019, 2:17:43 PM
Can I run two of these speaker on the same amplifier if it only has one set of speaker inputs?
Customer Service • 12/17/2019, 2:17:43 PM
Howie,
Good question. It all depends on what ohm load the amp can handle. One of these speakers is an 8ohm load, two of them will be a 4ohm load. If the amp can handle a 4 ohm load, it should be safe. I would contact the manufacturer of your amp and inquire about this. Thanks!
-BM
2258