View Owner's Manual
SKU: OSD-ICE520
OSD ICE5205.25" Contract Series Flush Mount 2-Way In-Ceiling Speaker Pair
Introducing our 5.25" Flush-Mount Ceiling Speakers, perfect for those who want high-quality sound without sacrificing aesthetics. These speakers feature a 5.25" cone woofer and a 0.5" pivoting PEI dome tweeter for a balanced and dynamic sound. The frequency response is 65Hz - 22kHz, making them suitable for a wide range of music genres. The speakers can handle up to 100W of power and have a sensitivity of 88 dB, making them able to produce clear and powerful sound. The impedance is 8 Ohms, compatible with most amplifiers. The Infinite Baffle Design allows for efficient sound distribution and the spring loaded binding posts allow for easy installation. The cutout diameter is 6.77" and they are sold as a pair. With a 10-year warranty, you can trust that these speakers will provide you with long-lasting, high-quality sound.
For a retrofit installation, no construction bracket is needed.
Customers often ask us if they need special installation mounting brackets on their OSD ceiling speakers. The answer is no and here’s why. All our in-ceiling speakers feature a dog leg (L-shaped) mounting system that is part of the frame. Before you install the speakers, remove the grille and you’ll see several the mounting screws near the front frame. These screws need to be loosened to activate the dog leg clamps. Use a screwdriver to loosen (turn to the left) these screws and the clamp will come loose. When the speaker is in position in the ceiling, tighten (turn to the right) the screw and the speaker will be secured to the ceiling.
Warning: California's Proposition 65
Warning:
This product can expose you to chemicals, including vinyl chloride, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Speaker Type: 5.25" Flush-Mount Ceiling Speakers
- Woofer: 5.25" Polypropylene Cone with Rubber Surround
- Tweeter: 0.5" Pivoting PEI Dome
- Frequency Response: 65Hz - 22kHz
- Power Handling: 100W
- Sensitivity: 88 dB
- Impedance: 8 Ohms
- Infinite Baffle Design
- Spray Paintable Snap-In Grille Included
- Inputs: Spring Loaded Binding Posts
- Install-friendly Dog Ear Installation Brackets
- Diameter & Depth: 7.87" x 2.76"
- Cutout Diameter: 6.77"
- Sold As: Pair
- Warranty: 10 Years
6 Questions asked
Have a Questions?
What's on your mind?
Douglas Blosl • 05/03/2023, 8:30:47 PM
What is the best way to get the screen/cover off to access the mount screws with out damaging it?
Customer Service • 05/22/2023, 7:29:46 PM
Hi Douglas:
These are the best tools I found to help remove the grills with the small perf holes. They are called Husky pick tools: Here is the link from Home Depot.https://www.homedepot.com/p/Husky-Precision-Hook-and-Pick-Tool-Set-4-Piece-60004H/302435929. You still want to be careful when pulling the grill going from side to side and slowly pulling on it. I literally just did it myself to two of my in-ceiling speakers I am going to replace with angled in-ceiling speakers for my home theater setup. The grills had not been removed in over 10 years.
Tim L 5/2023
- < Previous
- 1
- 2